Steel Products
Sixty International supplies structural, flat and long steel products to contractors, fabricators, manufacturers and stockists across the UAE and the wider GCC. We source from established mills and stockyards and match each order to the grade, standard and tolerances on your drawings or project specification.
Every shipment can be supported by Mill Test Certificates (EN 10204 3.1), Certificate of Origin, packing lists and, where required, third-party inspection before dispatch. Supply is available ex-stock in the UAE, CFR/CIF to your port, or delivered to site.
Our Product Range
Reinforcement Bars (Rebar)
High-yield deformed bars for concrete reinforcement in buildings, infrastructure and precast.
- BS 4449 B500B / B500C
- ASTM A615 Gr 60
- Dia 8 – 32 mm
- 12 m lengths or cut & bent
Structural Sections
Beams, columns, channels and angles for steel structures, sheds, mezzanines and fabrication.
- IPE, HEA / HEB, UB / UC
- UPN / PFC channels, angles
- S275JR / S355JR
- ASTM A36 / A572 Gr 50
Hot-Rolled Coils & Plates
HR coils, sheets and heavy plates for fabrication, tanks, machinery bases and pressure work.
- S235 / S275 / S355
- ASTM A36, A516 Gr 70
- 1.5 – 150 mm thick
- Cut-to-length available
Galvanized & Pre-Painted Steel
GI, Galvalume and PPGI coils and sheets for roofing, cladding, ducting and panels.
- DX51D / SGCC
- Zinc Z80 – Z275
- 0.3 – 3.0 mm thick
- RAL colours for PPGI
Steel Pipes & Hollow Sections
ERW and seamless line pipes, structural tubes and SHS / RHS for oil & gas, water and structures.
- API 5L, ASTM A53 / A106
- EN 10219 SHS / RHS
- Black or hot-dip galvanized
- ½" – 24" NB
Stainless Steel
Sheets, coils, pipes, round bars and fittings for food, marine, architectural and process use.
- Grades 304 / 304L
- 316 / 316L, 430
- 2B, BA, No.4, HL finish
- Sheets, tubes, bars
Wire Rod & Binding Wire
Low-carbon wire rod for drawing and mesh production, plus annealed binding wire for site use.
- SAE 1006 / 1008
- Dia 5.5 – 12 mm
- Annealed binding wire
- Coils as per order
Steel Billets
Square billets as feedstock for re-rolling mills producing rebar and merchant bars.
- Grades 3SP / 5SP
- 100 – 150 mm square
- 6 – 12 m lengths
- Bulk / break-bulk shipments
Mill Test Certificates
EN 10204 3.1 MTCs traceable to heat numbers.
Third-Party Inspection
SGS, Bureau Veritas or your nominated inspector, on request.
Flexible Incoterms
Ex-stock UAE, FOB, CFR / CIF or delivered to site.
UAE-Compliant Documents
VAT tax invoices, Certificate of Origin and full shipping set.